CHAPTER XI  M INDUSTRIAL DISTRICT

SECTION 11.01 DESCRIPTION AND PURPOSE.  This district is composed of certain land so situated as to be suitable for industrial development, but where the modes of operations of the industry may directly affect nearby non-industrial development. The regulations are so designed as to permit the normal operations of almost all industries, subject only to those needed for their mutual protection and the equitable preservation of nearby non-industrial uses of lands.

All outdoors storage facilities for fuel, raw materials and products for every use, as enumerated and limited herein, located less than one hundred (100) feet from any other district, shall be enclosed by a solid fence or wall; provided, however, that such fence or wall need not exceed ten (10) feet in height.

SECTION 11.02 PERMITTED USES.  For land and/or buildings, the permitted uses and height area requirements of the M-District are as follows:

(a)  Use Regulations:

(1)   Manufacturing, processing and/or fabrication - Any structure used therefore shall be not less than one hundred (100) feet from any R or PUD District:

* automotive and aircraft parts (not including tires) and metal working excluding presses of over twenty (20) tons capacity and machine operated drop hammers

            * automotive assembling and including major repair

            * bag, rug and carpet cleaning

            * bakery; large wholesale and chain types

            * bottling plant, brewery, dairy products plant

            * candy, potato chips, flavoring extracts

            * cleaning or dyeing plants and laundries

            * cold storage plant

            * electrical equipment and motor

            * electrical foundry or small foundry for nonferrous metals

            * experimental laboratory

            * felt and felt products

            * flexible hose lines and fittings; basic manufacture

            * garage maintenance tools and equipment

            * garment making; apparel and accessories

            * heating and air conditioning equipment

            * mattress making and box springs

            * paper products fabrication

            * pharmaceuticals, cosmetics and toiletries

            * plastic products from purchased plastic materials

            * professional and scientific instruments

            * surgical supports and hospital equipment

            * tool and die shops - screw machine products

            * tube fabrication; bending and welding

            * wire fabricators

            * wood products assembly

* any other light manufacturing, processing and/or fabrication but not including any uses specifically listed in Section 10.2 (a)

(2)   Manufacturing (basic), processing and/or fabrication - Any structure used therefore shall be not less than two hundred (200) feet from any R or PUD District:

            * abrasives, acid, alcohol, ammonia, and asbestos

            * bone black, carbon black, and lamp black

            * brick, clay, tile manufacture

            * canning and preserving plants

            * charcoal and coke; basic manufacture

            * chemicals; manufacture or processing

            * cinder block fabrication

            * creosote treatment

            * detergents, soaps and byproducts

            * forge plant, foundries

            * fungicides and insecticides

            * galvanizing and anodizing processes

            * gases; manufacture

            * glass products

            * glue, size or gelatin; manufacture

            * grain milling and mixing

            * graphite; manufacture

            * insulation, manufacture or fabrication

            * metals, ingots, castings, sheets, bars or rods

            * oils and fats, animal or vegetable; manufacture

            * paints, pigments, enamels, japans, lacquer, varnishes

            * paper pulp and cellulose

            * paraffin, wax and wax products

            * plastics; basic manufacture

            * plating of metals

            * rubber and rubber products; manufacture

            * sauerkraut, vinegar and yeast; manufacture

            * sawmill or planning mill

            * serums, toxins, viruses; manufacture

            * sound deadness, caulking, mastic and undercoating; manufacture

* any other basic manufacturing processing and/or fabrication, but not including any uses specifically listed in Section 10.62 (a) (3) and Section 10.2 (a) (4).

(3)   Sale at Wholesale and Retail - Warehousing and storage; and repair, rental and servicing of any of the uses enumerated in Section 1 and 2 above, any building used for such purpose shall be located not less than seventy-five (75) feet from any R or PUD District.

(4)   Other uses permitted:

* auction houses - if operation ceases before midnight and wholly enclosed within a building

            * bazaar, carnival or circus

            * billboards

            * canteen service

* contractor's yards for vehicles, equipment, materials and/or supplies, but excluding asphalt and cement mixing, provided that such yards shall be not less than two hundred (200) feet from any R or PUD District

            * garbage or trash disposal areas, dumps, sanitary landfills

* gasoline service station, provided building used for such purposes shall not be nearer than one hundred (100) feet to any R or PUD District

            * kennels

* livestock auction - not closer than three hundred (300) feet to an R or PUD District

* municipal buildings, including warehouses, outside storage and garages, provided that such buildings and premises shall be not less than one hundred (100) feet from any R or PUD District

* offices and/or meeting halls (excluding halls for social purposes shall not be nearer than twenty (20) feet from any R or PUD District

* parking and/or storage yards for motor vehicles (excluding junked vehicles) and including transport equipment, provided such yards shall be not less than two hundred (200) feet from any R or PUD District

* trucking freight terminal and yards, provided such buildings shall be not less than two hundred (200) feet from any R or PUD District

* veterinary clinic not less than one hundred (100) feet from any R or PUD District

(5)   The following uses when conducted wholly within a completely enclosed building or within an area enclosed with a chain link fence.  All operations shall be at least fifty (50) feet from any R or PUD District.

            * building material sales yard, not including concrete or asphalt mixing

            * retail lumber yard, including only incidental mill work

            * coal, feed, fertilizer sales and storage

            * carting, packing and moving companies including storage of goods and vehicles

            * contractor's equipment storage yard or plant, but not including outdoor repair or                     outdoor salvage operations

            * public utility material storage and service yard

            * truck terminal including motor freight station and storage yard

            * outdoor advertising service including construction and storage of materials and                        equipment

            * pattern making (lightweight nonferrous metals)

            * welding shops

(b)   Height Regulations - Three stories or forty-five (45) feet, which ever is lesser.

(c)   Area Regulations - No building or structure nor the enlargement of any building or structure shall be hereafter erected unless the following yard requirements are provided and maintained in connection with such building structure or enlargement.

(1)  Front Yard - Every lot shall be provided with a front yard of not less than one hundred (100) feet in depth when such yard is adjacent to an R District boundary line; and, when a front yard is adjacent to any other district, it shall be not less than forty (40) feet in depth.

            (2)  Side Yard - None required except adjacent to an R District, then the required                     distance from the R District is stipulated in Section 10.02.

(3)  Rear Yard - The depth of a rear yard shall be governed by the number of stories in the structure; one (1) story, thirty (30) feet; two (2) story, forty (40) feet; three (3) story, fifty (50) feet; provided, however, the required distance from an R District when stated for a structure in Section 10.2 shall take precedent over the above stated rear yard depths.